Nissan Maxima Service and Repair Manual: REAR RH SIDE POWER WINDOW ALONE DOES NOT OPERATE

Rear LH side power window alone does not operate

Diagnosis Procedure 1. CHECK REAR POWER WINDOW MOTOR LH Check rear power window motor LH. ...

Anti-pinch system does not operate normally (driver side)

Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. 2. CHECK ENCODER CIRCUIT Check encoder circuit. ...

Other materials:

P0127 IAT sensor
Description The intake air temperature sensor is built-into the mass air flow sensor (1). The sensor detects intake air temperature and transmits a signal to the ECM. The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance o ...

License plate lamp
Exploded View License plate lamp Removal and Installation LICENSE PLATE LAMP Removal Remove the license lamp finisher. Refer to EXT-31, "Removal and Installation". Position trunk lid finisher aside. Refer to INT-36, "Exploded View". Remove the license plate lamp screw and ...

B2608 starter relay
Description Located in IPDM E/R, it runs the starter motor. The starter relay is turned ON by the BCM when the ignition switch is in START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: If DTC B2608 is displ ...