Nissan Maxima Service and Repair Manual: Cruise control & driver assistance

Rear view camera

Removal and Installation REMOVAL Remove the license plate finisher. Refer to EXL-166, "Removal and Installation". Remove trunk lid finisher. Refer to INT-36, "Exploded View&qu ...

Precaution

PRECAUTIONS Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PR ...

Other materials:

P0441 evap control system
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0441 is displayed with other DTC such as P2122, P2123, P2127, P2128 or P2138, first perform trouble diagnosis for other DTC. In this evaporative emission (EVAP) control system, purge flow occurs during non-closed throttle conditions. Purge vo ...

Body side trim
Exploded View Front pillar finisher Dash side lower finisher Front kicking plate Front sill cover Center pillar lower finisher Rear sill cover Rear kicking plate Rear body side welt Rear pillar finisher Screw cover Center pillar upper finisher Front seat belt adju ...

Power supply and ground circuit
BCM BCM : Diagnosis Procedure 1. CHECK FUSE AND FUSIBLE LINK Check if the following BCM fuses or fusible link are blown. 2. CHECK POWER SUPPLY CIRCUIT Turn ignition switch OFF. Disconnect BCM. Check voltage between BCM harness connector and ground. 3. CHECK GROUND CIRCUIT Che ...