DTC Logic

Diagnosis Procedu
1.ADJUST THE PREDICTIVE COURSE LINE CENTER POSITION OF THE STEERING ANGLE SENSOR
When U1232 is detected, adjust the predictive course line center position of the steering angle senso
U1227 AV control unit
U1243 display unitChanging engine oil
1. Park the vehicle on a level surface and apply
the parking brake.
2. Start the engine and let it idle until it reaches
operating temperature, then turn it off.
3. Remove the oil filler cap A by turning it
counterclockwise.
4. Remove clips B from the under-engine protector.
5 ...
Switch operation
Type A (if so equipped)
The windshield wiper and washer operates when
the ignition switch is placed in the ON position.
Push the lever down to operate the wiper at the
following speed:
Intermittent (INT) or (AUTO) - intermittent
operation can be adjusted by turning the
knob A .
L ...
Front passenger air bag module
Removal and Installation
CAUTION:
Before servicing, turn ignition switch OFF, disconnect both
battery terminals and wait at least 3 minutes.
Do not use air tools or electric tools for servicing.
Always work from the side of air bag module. Do not work from
the front of it.
Always pl ...