Nissan Maxima Service and Repair Manual: System description

Inspection and adjustment

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description Initial setting is necessary when battery terminal is removed. CA ...

Power window system

System Diagram System Description MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH INPUT/OUTPUT SIGNAL CHART POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH NPUT/OUTPUT SIGNAL CHART POWER W ...

Other materials:

P0703 brake switch B
Description BCM detects ON/OFF state of the stop lamp switch and transmits the data to the TCM via CAN communication by converting the data to a signal. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: Immediately after perform ...

Suspension ARM
Removal and Installation Removal Remove the rear suspension member. Refer to RSU-16, "Removal and Installation". Remove the connecting rod mount bracket nut and bolt from the rear suspension arm using power tools.Remove the connecting rod mount bracket. Remove each rear suspension ...

Microphone signal circuit
Description Voice signals are transmitted from the microphone to the Bluetooth control unit using the microphone signal circuits. Diagnosis Procedure 1.CHECK HARNESS BETWEEN BLUETOOTH CONTROL UNIT AND MICROPHONE Turn ignition switch OFF. Disconnect Bluetooth control unit connector and ...