Diagnosis Procedure
1. CHECK INTELLIGENT KEY FUNCTION
Check Intelligent Key function.
Does not operate by key cylinder switch
Power window lock switch does not functionRGB (B: blue) signal circuit
Description
Transmit the image displayed with AV control unit with RGB signal to the
display unit.
Diagnosis Procedure
1.CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT
Turn ignition switch OFF.
Disconnect display unit connector M141 and AV control unit
connector
M154.
Check con ...
Intelligent key battery
Removal and Installation
Release the lock knob at the back of the Intelligent Key and remove the
mechanical key.
Insert a suitable tool (A) wrapped with a cloth into the slit of the
corner and twist it to separate the upper part from the lower part.
Replace the battery with new o ...
Horn function
Description
Perform answer-back for each operation with horn.
Component Function Check
1. CHECK FUNCTION
Select HORN in "ACTIVE TEST" mode with CONSULT.
Check the horn (high/low) operation.
Diagnosis Procedure
1. CHECK HORN FUNCTION
Check horn function with horn switch
2. CHECK ...