SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
*: Always check with the Parts Department for the latest parts informatio
Rear combination lampBCM branch line circuit
Diagnosis Procedure
1.CHECK CONNECTOR
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the BCM for damage, bend and
loose connection (unit side and
connector side).
2.CHECK HARNESS FOR OPEN CIRCUIT
Disc ...
Unit disassembly and assembly
FRONT REGULATOR
Exploded View
Door panel
Door glass
Regulator assembly
Door module assembly
Window motor
Disassembly
Remove the window motor from the door module assembly.
Remove the four window regulator bolts from the door module
assembly.
Remove the window regulat ...
Line pressure test
Inspection and Judgment
INSPECTION
Line Pressure Test Procedure
Inspect the amount of engine oil and replenish
if necessary.
Drive the car for about 10 minutes to warm it
up so that the CVT fluid reaches in the range of 50 to 80C
(122 to 176F). Then inspect the ...