Nissan Maxima Service and Repair Manual: Wiper and washer fuse

DTC/circuit diagnosis

...

Front wiper motor lo circuit

Component Function Check 1. CHECK FRONT WIPER LO OPERATION IPDM E/R AUTO ACTIVE TEST Start IPDM E/R auto active test. Refer to PCS-11, "Diagnosis Description". Check that the front wiper op ...

Other materials:

B26e1 no reception of engine status signal
Description BCM receives the engine status signal from ECM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: If DTC B26E1 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-29, "DTC Logic". If DTC B26E1 is displayed with D ...

Heating (A/C OFF)
The air conditioner does not activate. When you need to heat only, use this mode. 1. Press the AUTO button. 2. Turn the temperature control dial to set the desired temperature. The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fa ...

P1709 incompleted data writing
Description When TCM does not store calibration data (individual characteristic value) of each solenoid valve that is stored in the ROM assembly (in the control valve), a malfunction is detected. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE NOTE: Immediately after performing ...