Nissan Maxima Owners Manual: Spark plugs

Replacing spark plugs

Iridium-tipped spark plugs

Nissan Maxima. Iridium-tipped spark plugs

It is not necessary to replace iridium-tipped A spark plugs as frequently as conventional type spark plugs because they last much longer. Follow the maintenance log shown in the "Maintenance and schedules" section of this manual. Do not service iridium-tipped spark plugs by cleaning or regapping.

  • Always replace spark plugs with recommended or equivalent ones.

WARNING

Be sure the engine and ignition switch are off and that the parking brake is engaged securely.

CAUTION

Be sure to use the correct socket to remove the spark plugs. An incorrect socket can damage the spark plugs.

If replacement is required, it is recommended that you visit a NISSAN dealer for this service.

    Drive belt
    VQ35DE engine 1. Crankshaft pulley 2. Drive belt automatic tensioner pulley 3. Generator pulley 4. Air conditioner compressor pulley WARNING Be sure the ignition switch is placed in the OFF ...

    Air cleaner
    The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the "Maintenance and schedules" section of this manual. When replacing the filter, w ...

    Other materials:

    B2560 starter control relay
    Description Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in N or P position. It is installed in parallel with the starter relay. DTC Logic DTC DETECTION LOGIC NOTE: If DTC B2560 is displayed with DTC U1000, first perform the trouble diagno ...

    Canceling a remote start
    To cancel a remote start, perform one of the following: Aim the Intelligent Key at the vehicle and press until the parking lights turn off. Turn on the hazard warning flashers. Cycle the ignition switch ON and then OFF. The extended engine run time has expired. The first 10 minute ...

    Hazard switch
    Component Function Check 1.CHECK HAZARD SWITCH SIGNAL BY CONSULT CONSULT DATA MONITOR Turn ignition switch ON. Select "HAZARD SW" of BCM (FLASHER) DATA MONITOR item. With operating the hazard switch, check the monitor status. Diagnosis Procedure 1.CHECK HAZARD SWITCH SIGNAL INPUT ...

    Nissan Maxima Owners Manual

    Nissan Maxima Service and Repair Manual

    © 2017-2026 Copyright www.nimainfo.com
    0.0154