Nissan Maxima Service and Repair Manual: DTC/circuit diagnosis

Interior

Wiring diagram

Other materials:

Diagnosis sensor unit
Removal and Installation WARNING: Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 minutes. Before disconnecting the air bag sensor unit harness connector, be sure to disconnect the harness connector of each air bag module and pre-tens ...

P1723 speed sensor
Description The secondary speed sensor detects the revolution of parking gear and generates a pulse signal. The pulse signal is sent to the TCM, which converts it into vehicle speed. The primary speed sensor detects the primary pulley revolution speed and sends a signal to the TCM. DTC Lo ...

B2193 chain of ECM-IMMU
Description BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK. ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if ignition switch is turned ON. DTC Logic DTC DETECTION LOGIC ...