Nissan Maxima Service and Repair Manual: Horn function

Hazard function

Symptom Table HAZARD AND BUZZER REMINDER FUNCTION MALFUNCTION NOTE: Before performing the diagnosis in the following table, check "Work flow". Refer to DLK-9, "Work Flow". If the ...

Squeak and rattle trouble diagnoses

Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the ...

Other materials:

P0447 evap canister vent control valve
Description The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid valve responds to signals from the ECM. When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal ...

Anti-lock Braking System (ABS) warning indicator
When the parking brake is released and the brake fluid level is sufficient, if both the brake warning light and the ABS warning light illuminate, it may indicate the ABS is not functioning properly. Have the brake system checked and, if necessary, repaired. It is recommended that you visit a N ...

B2581, B2582 intake sensor
Description Intake Sensor The intake sensor is located on the evaporator. It converts air temperature after it passes through the evaporator into a resistance value which is then input to the A/C auto amp. Intake Sensor Circuit DTC Logic DTC DETECTION LOGIC NOTE: If DTC is di ...