Nissan Maxima Service and Repair Manual: Power window retained power operation does not operate properly

Auto operation does not operate but manual operates normally (passenger side)

Diagnosis Procedure 1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. 2. CHECK ENCODER Check encoder. ...

Does not operate by key cylinder switch

Diagnosis Procedure 1. CHECK FRONT DOOR LOCK ASSEMBLY LH (KEY CYLINDER SWITCH) Check front door lock assembly LH (key cylinder switch). ...

Other materials:

U1000 CAN comm circuit
Description DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by performing the Self Diagnostic Result procedure. Diagnosis Proc ...

Exhaust valve timing control
System Diagram System Description INPUT/OUTPUT SIGNAL CHART *: This signal is sent to the ECM via the CAN Communication line. SYSTEM DESCRIPTION This mechanism magnetically controls cam phases continuously with the fixed operating angle of the exhaust valve. The ECM receives ...

B263D, B263E, B263F intake door motor
Description COMPONENT DESCRIPTION Intake Door Motor The intake door motor (1) is attached to the blower unit. It rotates so that air is drawn from inlets set by the A/C auto amp. Motor rotation is conveyed to a lever which activates the intake door. DTC Logic DTC DETECTION L ...