Nissan Maxima Owners Manual: Aluminum alloy wheels

Wash the wheels regularly with a sponge dampened in a mild soap solution, especially during winter months in areas where road salt is used. If not removed, road salt can discolor the wheels.

CAUTION

Follow the directions below to avoid staining or discoloring the wheels:

  • Do not use a cleaner that uses strong acid or alkali contents to clean the wheels.
  • Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as ambient temperature.
  • Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied.

Chrome parts

Clean all chrome parts regularly with a nonabrasive chrome polish to maintain the finish.

    Glass
    When cleaning the rear window, it may be easier to clean if the high-mounted stop light is removed first. Be careful when removing the high-mounted stop light to reduce the risk of damaging th ...

    Tire dressings
    NISSAN does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may ...

    Other materials:

    B2191 difference of key
    Description Performs ID verification through BCM and Intelligent Key when push-button ignition switch is pressed. Prohibits the start of engine when an unregistered ID of Intelligent Key is used. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCED ...

    Front door switch (driver side)
    Description Detects front door LH open/close condition. Component Function Check 1. CHECK FUNCTION Select "DOOR SW-FL" in "DATA MONITOR" mode with CONSULT. Check the front door switch signal under the following conditions Diagnosis Procedure 1. CHECK FRONT DOOR SWITCH LH CIRCUIT ...

    Power supply and ground circuit
    BCM BCM : Diagnosis Procedure 1. CHECK FUSE AND FUSIBLE LINK Check if the following BCM fuses or fusible link are blown. 2. CHECK POWER SUPPLY CIRCUIT Turn ignition switch OFF. Disconnect BCM. Check voltage between BCM harness connector and ground. 3. CHECK GROUND CIRCUIT Che ...

    Nissan Maxima Owners Manual

    Nissan Maxima Service and Repair Manual

    © 2017-2026 Copyright www.nimainfo.com
    0.0055