Nissan Maxima Owners Manual: Air fresheners

Cleaning interior

Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather (if so equipped) surfaces with a clean, sof ...

Floor mats

WARNING To avoid potential pedal interference that may result in a collision, injury or death: NEVER place a floor mat on top of another floor mat in the driver front position. Use only ...

Other materials:

Reclining sensor
Description The reclining motor is installed to the seatback assembly. The pulse signal is input to the driver seat control unit when the reclining is operated. The driver seat control unit counts the pulse and calculates the reclining amount of the seat. Component Function Check 1 ...

B2617 starter relay circuit
Description Located in IPDM E/R, it runs the starter motor. The starter relay is turned ON by the BCM when the ignition switch is in START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: If DTC B2617 is displ ...

P1574 ASCD vehicle speed sensor
Description The ECM receives two vehicle speed signals via the CAN communication line. One is sent from combination meter, and the other is from TCM (Transmission control module). The ECM uses these signals for ASCD control. Refer to EC-68, "System Diagram" for ASCD functions. D ...