Nissan Maxima Owners Manual: Owner's Manual/Service Manual order information

Nissan Maxima Owners Manual / Technical and consumer information / Owner's Manual/Service Manual order information

Genuine NISSAN Service Manuals for this model year and prior can be purchased. A Genuine NISSAN Service Manual is the best source of service and repair information for your vehicle.

This manual is the same one used by the factorytrained technicians working at NISSAN dealerships.

Genuine NISSAN Owner's Manuals can also be purchased.

For USA

For current pricing and availability of Genuine NISSAN Service Manuals, contact:

For current pricing and availability of Genuine NISSAN Owner's Manuals, contact

1-800-247-5321

For Canada

To purchase a copy of a Genuine NISSAN Service Manual or Owner's Manual, for this model year and prior, please visit the nearest NISSAN dealer. For the phone number and location of a NISSAN dealer in your area, call the NISSAN Information Center at 1-800-387-0122 and a bilingual NISSAN representative will assist you.

Event Data Recorders (EDR)

This vehicle is equipped with an EDR. The main purpose of an EDR is to record, in certain collision or near collision-like situations, such as an air bag deployment or hitting a road obstacle, dat ...

Nissan Maxima Service and Repair Manual

...

Other materials:

Headlamp (HI) circuit
Description The IPDM E/R (intelligent power distribution module engine room) controls the headlamp high relay based on inputs from the BCM over the CAN communication lines. When the headlamp high relay is energized, power flows through fuses 48 and 49, located in the IPDM E/R. Power then flow ...

B1145 - B1148 side curtain air bag module RH
Description DTC B1145 - B1148 RH SIDE CURTAIN AIR BAG MODULE The RH side curtain air bag module is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensorunit will monitor for opens and shorts in detected lines to the RH side curtain air bag module. PART LOCATION DTC Logic ...

DTC/circuit diagnosis
CHARGING SYSTEM PRELIMINARY INSPECTION Diagnosis Procedure 1.CHECK BATTERY TERMINALS CONNECTION Check if battery terminals are clean and tight 2.CHECK FUSE Check for blown fuse and fusible link. 3.CHECK GENERATOR GROUND TERMINAL CONNECTION Check if connector E230 terminal 5 (generator groun ...