Nissan Maxima Service and Repair Manual: System description

Preparation

PREPARATION Special Service Tool The actual shapes of the tools may differ from those illustrated here Commercial Service Tool ...

Overheating cause analysis

Troubleshooting Chart ...

Other materials:

Both side headlamps do not switch to high beam
Description The headlamps (both sides) do not switch to high beam when the lighting switch is in the HI or PASS setting. Diagnosis Procedure 1.COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION Check the combination switch (lighting and turn signal switch). 2.CHECK HEADLAMP (HI) ...

P0715 input speed sensor A
Description The primary speed sensor detects the primary pulley revolution speed and sends a signal to the TCM. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: Immediately after performing any "DTC CONFIRMATION PROCEDURE", a ...

Inspection and adjustment
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description After replacing the ABS actuator and electric unit (control unit), perform the neutral position adjustment for the steering angle sensor. ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT ...