Nissan Maxima Service and Repair Manual: Memory function does not operate

Component Function Check

Symptom

  • Memory function does not operate normally.
  • The setting is not maintained. (It returns to the initial condition.)

1.CHECK OPERATION

  1. Set temperature control switch to 32C (90F).
  2. Press the OFF switch.
  3. Turn the ignition switch OFF.
  4. Turn the ignition switch ON.
  5. Press the AUTO switch.
  6. Check that the set temperature is maintained.
    Noise
    Component Function Check Symptom Noise Noise is heard when the A/C system operates. INSPECTION FLOW ...

    Precaution
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", ...

    Other materials:

    P1611 ID discord, IMMU-ECM
    Description BCM performs the ID verification with ECM that allows the engine to start. Start the engine if the ID is OK. ECM prevents the engine from starting if the ID is not registered. BCM starts the communication with ECM if ignition switch is turned ON. DTC Logic DTC DETECTION LOGIC ...

    B2560 starter control relay
    Description Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in N or P position. It is installed in parallel with the starter relay. DTC Logic DTC DETECTION LOGIC NOTE: If DTC B2560 is displayed with DTC U1000, first perform the trouble diagno ...

    C1734 control unit
    Description An internal malfunction has been detected in the TPMS function of the BCM. DTC Logic NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS trans ...

    Nissan Maxima Owners Manual

    Nissan Maxima Service and Repair Manual

    © 2017-2025 Copyright www.nimainfo.com
    0.0091