Nissan Maxima Owners Manual: Opening windows

Unlocking doors

1. Press the   button on the Intelligent Key. 2. The driver's door will unlock and the hazard warning lights flash once, and the front and tail lights will turn on for 30 seconds. ...

Releasing the trunk lid

Press the button for longer than 1 second to open the trunk lid. The trunk release button will not operate when the ignition switch is in the ON position or when the trunk cancel switch is i ...

Other materials:

BCM (body control module)
Reference Value NOTE:The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech IIUser Guide for additional information. Activate and display TPMS transmitter IDs Display tire pressure reported by the TPMS transmitter Read TPMS DTCs Regi ...

U0100 lost communication (ECM A)
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test. 2.PERFORM DTC CONFIRMATION PROCEDURE  Start the en ...

Headlamp (LO) circuit
Description The IPDM E/R (intelligent power distribution module engine room) controls the headlamp low relay based on inputs from the BCM over the CAN communication lines. When the headlamp low relay is energized, power flows through fuses 51 and 52, located in the IPDM E/R. Power then flows ...