Wiring Diagram
Oil filter
Removal and Installation
REMOVAL
Drain engine oil. Refer to LU-9, "Changing Engine Oil".
Remove front fender protector side cover (RH). Refer to EXT-15,
"Exploded View".
Remove the oil filter using Tool (A) as shown.
Tool number : KV10115801 (J-38956)
WARNING: Be ...
CAN communication circuit
Diagnosis Procedure
1.CONNECTOR INSPECTION
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Disconnect all the unit connectors on CAN communication system.
Check terminals and connectors for damage, bend and loose
connection.
2.CHECK HARNESS CON ...
P1805 brake switch
Description
Brake switch signal is applied to the ECM via the stop lamp switch when the
brake pedal is depressed. This
signal is used mainly to decrease the engine speed when the vehicle is being
driver.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATI ...