Nissan Maxima Service and Repair Manual: Removal and installation

Preparation

Special Service Tool The actual shapes of the tools may differ from those illustrated here. ...

Interior room lamp

Removal and Installation FRONT ROOM/MAP LAMP ASSEMBLY Removal Release the metal clips and drop front edge of front room/map lamp assembly (1) away from headlining. Slide front room/map lamp ...

Other materials:

Intelligent key warning buzzer
Description Answers back and warns for an inappropriate operation. Component Function Check 1. CHECK FUNCTION With CONSULT Check Intelligent Key warning buzzer OUTSIDE BUZZER in Active Test mode. Diagnosis Procedure 1. CHECK INTELLIGENT KEY WARNING BUZZER Check voltage between BCM connecto ...

U0415 Vehicle speed sig
Description U0415 is displayed if any unusual condition is present in the reception status of the vehicle speed signal from the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. DTC CONFIRMATION Erase the DTC. Turn ignition ...

Headlamp (LO) circuit
Description The IPDM E/R (intelligent power distribution module engine room) controls the headlamp low relay based on inputs from the BCM over the CAN communication lines. When the headlamp low relay is energized, power flows through fuses 51 and 52, located in the IPDM E/R. Power then flows ...