Removal and Installation
REMOVAL

INSTALLATION
Installation is in the reverse order of removal.
Subwoofer AMP
Audio antennaRGB (G: green) signal circuit
Description
Transmit the image displayed with AV control unit with RGB signal to the
display unit.
Diagnosis Procedure
1.CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT
Turn ignition switch OFF.
Disconnect display unit connector M141 and AV control unit
connector M117.
Check conti ...
System description
STARTING SYSTEM
System Diagram
System Description
The starter motor plunger closes and provides a closed circuit between the
battery and the starter motor. The starter motor is grounded to the cylinder
block. With power and ground supplied, the starter motor operates.
Component Description ...
P1722 vehicle speed
Description
The vehicle speed signal is transmitted from ABS actuator
and electric unit (control unit) to TCM via CAN communication
line.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
Immediately after performing any "DT ...