Nissan Maxima Service and Repair Manual: Warning chime function

Description

Performs operation method guide and warning with buzzer.

Component Function Check

1. CHECK FUNCTION

With CONSULT

  1. Check the operation with "INSIDE BUZZER" in the Active Test.
  2. Touch "TAKE OUT", "KNOB"or "KEY"on screen.

Diagnosis Procedure

1. CHECK METER BUZZER CIRCUIT

2. CHECK INTERMITTENT INCIDENT

    Combination meter display function
    Description Displays each operation method guide and warning for system malfunction. Component Function Check 1. CHECK FUNCTION With CONSULT Check the operation with ("LCD") in the Active Test. ...

    Hazard function
    Description Perform answer-back for each operation with number of blinks. Component Function Check 1. CHECK FUNCTION Check hazard warning lamp ("FLASHER") in Active Test. Diagnosis Procedure 1 ...

    Other materials:

    C1130, C1131, C1132, C1133, C1136 engine signal
    Description ABS actuator and electric unit (control unit) and ECM exchange the engine signal with CAN communication line. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Diagnosis Procedure 1.CHECK ENGINE S ...

    U1000 Can comm circuit
    Description DTC Logic DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by performing the Self Diagnostic Result procedure. Diagnosis Proc ...

    Optical sensor
    Description The optical sensor converts the outside brightness (lux) to voltage and transmits the optical sensor signal to the BCM. Component Function Check 1.CHECK OPTICAL SENSOR SIGNAL BY CONSULT CONSULT Turn the ignition switch ON. Select "OPTICAL SENSOR" of BCM (HEAD LAMP) DATA MONIT ...

    Nissan Maxima Owners Manual

    Nissan Maxima Service and Repair Manual

    © 2017-2026 Copyright www.nimainfo.com
    0.0069