Nissan Maxima Service and Repair Manual: Sunroof motor assembly

BCM (body control module)

Reference Value NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Activate and display ...

Sunshade motor assembly

Reference Value TERMINAL LAYOUT PHYSICAL VALUES ...

Other materials:

Basic inspection
INSPECTION AND ADJUSTMENT Operational Check DESCRIPTION The purpose of the operational check is to check that the individual system operates normally. Conditions: Engine running at normal operating temperature INSPECTION PROCEDURE 1.CHECK MEMORY FUNCTION Start the engine. Operate the t ...

C1708 - C1711 data from transmitter not being received
Description Tire pressure data for one or more transmitters is not being received by the BCM. DTC Logic NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display T ...

Power supply and ground circuit
Description EPS system functions by ignition power supply. Diagnosis Procedure 1.CHECK POWER SUPPLY Turn the ignition switch OFF. Disconnect power steering control unit connector. Turn the ignition switch ON. Check voltage between power steering control unit connectorM59 terminal 3 ...