Diagnosis Procedure
1.CHECK SUNSHADE MECHANISM
Check the following.
2.CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit
3.CHECK COMMUNICATION CIRCUIT
Check communication circuit
4.CONFIRM THE OPERATION
Confirm the operation again.
Sunroof does not operate properly
Auto operation does not operateECU diagnosis information
DIAGNOSIS SENSOR UNIT
Trouble Diagnosis with CONSULT
DIAGNOSTIC CODE CHART
NOTE:Follow the procedures in numerical
order when repairing malfunctioning parts. Confirm whether malfunction is
eliminated using air bag warning lamp or CONSULT each time repair is finished.
If malfunction is stillo ...
P0703 brake switch B
Description
BCM detects ON/OFF state of the stop lamp switch and transmits the data to
the TCM via CAN communication
by converting the data to a signal.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
CAUTION: Always drive vehicle at a safe speed.
NOTE: Immediately after perform ...
P0138, P0158 HO2S2
Description
The heated oxygen sensor 2, after three way catalyst (manifold),
monitors the oxygen level in the exhaust gas on each bank.
Even if switching characteristics of the air fuel ratio (A/F) sensor 1
are shifted, the air-fuel ratio is controlled to stoichiometric, by the signal
...