Interior trunk access
Opening the fuel-filler doorHeated seat switches (if so equipped)
The front seats are warmed by built-in heaters.
1. Start the engine.
2. Push the LO or HI position of the switch, as
desired. The indicator light in the switch will
illuminate.
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light ...
U1010 control unit (CAN)
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1. REPLACE BCM
When DTC [U1010] is detected, replace BCM.
Special Repair Requirement
1. REQUIRED WORK WHEN REPLACING BCM
Initialize NVIS by CONSULT. For the details of initialization refer to
CONSULT Immobilizer mode and follow
the on ...
Diagnosis and repair workflow
Work Flow
WORK FLOW
DETAILED FLOW
1. GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the
condition and the environment when the incident/malfunction occurred).
2. CHECK DTC
Check DTC.
Perform the following procedure if DTC is displayed.
...