Nissan Maxima Service and Repair Manual: Front tweeter

Removal and Installation

REMOVAL

Nissan Maxima. REMOVAL

  1. Remove the front pillar finisher. Refer to INT-24, "Removal and Installation".
  2. Remove the front tweeter speaker grille. Refer to IP-10, "Exploded View".
  3. Remove the front tweeter speaker screws (A).
  4. Pull out front tweeter speaker (1), disconnect the harness connector from the front tweeter speaker and remove

INSTALLATION

Installation is in the reverse order of removal.

    Aux in jack
    Removal and Installation REMOVAL Remove the center console. Refer to IP-14, "Removal and Installation". Remove the center console bin box. Remove the auxiliary input jacks screws (A), th ...

    Front door speaker
    Removal and Installation REMOVAL Remove the front door finisher. Refer to INT-18, "Removal and Installation". Remove the front door speaker screws (A). Disconnect the harness connector f ...

    Other materials:

    EVAP canister
    Removal and Installation (EVAP Canister) EVAP control system pressure sensor EVAP canister O-ring  EVAP canister vent control valve O-ring NOTE: The EVAP canister vent control valve and EVAP canister system pressure sensor can be removed without removing the EVAP canis ...

    Cooling fan control
    System Diagram System Description INPUT/OUTPUT SIGNAL CHART *1: The ECM determines the start signal status by the signals of engine speed and battery voltage. *2: This signal is sent to ECM via the CAN communication line. SYSTEM DESCRIPTION The ECM controls the cooling fan correspon ...

    U0415 Vehicle speed sig
    Description U0415 is displayed if any unusual condition is present in the reception status of the vehicle speed signal from the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. DTC CONFIRMATION Erase the DTC. Turn ignition ...

    Nissan Maxima Owners Manual

    Nissan Maxima Service and Repair Manual

    © 2017-2023 Copyright www.nimainfo.com
    0.007