Nissan Maxima Service and Repair Manual: RGB (G: green) signal circuit

Description

Transmit the image displayed with AV control unit with RGB signal to the display unit.

Diagnosis Procedure

1.CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT

Nissan Maxima. CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT

  1. Turn ignition switch OFF.
  2. Disconnect display unit connector M141 and AV control unit connector M154.
  3. Check continuity between display unit harness connector M141 (A) terminal 6 and AV control unit harness connector M154 (B) terminal 39.
  4. Check continuity between display unit harness connector M141 (A) terminal 6 and ground

Nissan Maxima. CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT

Nissan Maxima. CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT

2.CHECK RGB (G: GREEN) SIGNAL

Nissan Maxima. CHECK RGB (G: GREEN) SIGNAL

  1. Connect display unit connector M141 and AV control unit connector M154.
  2. Turn ignition switch ON.
  3. Check signal between display unit harness connector M141 terminal 6 and ground.

Nissan Maxima. CHECK RGB (G: GREEN) SIGNAL

    RGB (R: red) signal circuit
    Description Transmit the image displayed with AV control unit with RGB signal to the display unit. Diagnosis Procedure 1.CHECK CONTINUITY RGB (R: RED) SIGNAL CIRCUIT Turn ignition switch ...

    RGB (B: blue) signal circuit
    Description Transmit the image displayed with AV control unit with RGB signal to the display unit. Diagnosis Procedure 1.CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT Turn ignition switch ...

    Other materials:

    Cooling fan
    Description The ECM controls the cooling fan corresponding to the vehicle speed, engine coolant temperature, refrigerant pressure, and air conditioner ON signal. The control system has 4-step control [HIGH/MIDDLE/LOW/OFF]. COOLING FAN MOTOR The cooling fan operates at each speed when the cu ...

    Unit disassembly and assembly
    FRONT DRIVE SHAFT Disassembly and Assembly (LH) Circlip Dust shield Housing  Snap ring Spider assembly Stopper ring  Boot band  Boot  Shaft  Damper band  Dynamic damper  Circlip . Joint sub-assembly : Wheel side : Fill us ...

    ECU diagnosis information
    BCM (BODY CONTROL MODULE) Reference Value NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS transmitter IDs Display tire pressure reported by the TPMS tran ...

    Nissan Maxima Owners Manual

    Nissan Maxima Service and Repair Manual

    © 2017-2026 Copyright www.nimainfo.com
    0.0058