Nissan Maxima Owners Manual: Cruise control (if so equipped)

System maintenance

The two radar sensors 1 for the BSW and RCTA systems are located near the rear bumper. Always keep the area near the radar sensors clean. The radar sensors may be blocked by temporary amb ...

Precautions on cruise control

1. CANCEL switch 2. RES+ switch 3. SET- switch 4. ON/OFF  cruise switch If the cruise control system malfunctions, it cancels automatically. WARNING Do not use the cruise control ...

Other materials:

Oil Seal
Removal and Installation of Valve Oil Seal REMOVAL Turn crankshaft until the cylinder requiring new oil seals is at TDC. This will prevent valve from dropping into cylinder. CAUTION: When rotating crankshaft, be careful to avoid scarring the front cover with the timing chain. Remove ...

Low tire pressure warning lamp does not turn on
Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch Is Turned On NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS transmitter IDs &n ...

P2127, P2128 APP sensor
Description The accelerator pedal position sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the ECM. Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometer whi ...