Removal and Installation

NOTE: The top tether strap child restraint is a
built-in part of the vehicle structure and is not serviceable.
: Front
Latch system for children
SRS airbagId registration cannot be completed
ID Registration Cannot Be Completed
NOTE: The Signal Tech II Tool (J-50190) can be used
to perform the following functions. Refer to the Signal Tech II User Guide
for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the TPMS t ...
U1010 control unit (CAN)
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1. REPLACE BCM
When DTC [U1010] is detected, replace BCM.
Special Repair Requirement
1. REQUIRED WORK WHEN REPLACING BCM
Initialize NVIS by CONSULT. For the details of initialization refer to
CONSULT Immobilizer mode and follow
the on ...
Antenna AMP
Removal and Installation
REMOVAL
Remove the rear pillar finisher RH. Refer to INT-23, "Exploded
View".
Detach the antenna amp. harness clip (A).
Disconnect the harness connectors (B) from the antenna amp.
(1).
Remove the antenna amp. screw (C) and the antenna amp. (1).
INSTALLAT ...