Diagnosis Procedure
1. CHECK FRONT DOOR SWITCH
Check front door switch.
Does not stop fully-open or fully-closed position
Sunroof does not operate anti-pinch functionSqueak and rattle trouble diagnoses
Work Flow
CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist
when the noise occurs. Use the Diagnostic Worksheet during the interview to
document the facts and conditions when the noise occurs and any customer's
comments; refer to RF-144, "Diagnos ...
P1701 TCM
Description
When the power supply to the TCM is cut off, for example
because the battery is removed, and the self-diagnosis
memory function stops, a malfunction is detected.
NOTE:
Since "P1701" is indicated when replacing TCM, perform diagnosis after erasing
"Self Diagnostic Results".
DTC ...
P0447 evap canister vent control valve
Description
The EVAP canister vent control valve is located on the EVAP canister
and is used to seal the canister vent.
This solenoid valve responds to signals from the ECM. When the
ECM sends an ON signal, the coil in the solenoid valve is energized.
A plunger will then move to seal ...