Nissan Maxima Service and Repair Manual: ECU diagnosis information

Microphone signal circuit

Description Voice signals are transmitted from the microphone to the Bluetooth control unit using the microphone signal circuits. Diagnosis Procedure 1.CHECK HARNESS BETWEEN BLUETOOTH CONTROL U ...

AV control unit

Reference Value VALUES ON THE DIAGNOSIS TOOL CONSULT data monitor item TERMINAL LAYOUT PHYSICAL VALUES *1 With satellite radio DTC Index Self-diagnosis results d ...

Other materials:

ECU diagnosis information
A/C AUTO AMP. Reference Value VALUES ON THE DIAGNOSIS TOOL CONSULT MONITOR ITEM A/C AUTO AMP. HARNESS CONNECTOR TERMINAL LAYOUT TERMINALS AND REFERENCE VALUES FOR A/C AUTO AMP. DTC Inspection Priority Chart If some DTCs are displayed at the same time, perform inspections one b ...

Front door speaker
Removal and Installation REMOVAL Remove the front door finisher. Refer to INT-18, "Removal and Installation". Remove the front door speaker screws (A). Disconnect the harness connector from the front door speaker (1) and remove. Remove the front door speaker spacer screws ...

P0725 engine speed
Description The engine speed signal is transmitted from ECM to TCM via CAN communication line. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: Immediately after performing any "DTC CONFIRMATION PROCEDURE", always turn igni ...