Nissan Maxima Service and Repair Manual: DTC/circuit diagnosis

Diagnosis system (BCM)

COMMON ITEM COMMON ITEM: CONSULT Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. Direct Diagnostic Mode Des ...

Rear window defogger switch

Description The rear window defogger is operated by turning the rear window defogger switch ON. Turns the indicator lamp in the rear window defogger switch ON when operating the rear windo ...

Other materials:

Front wiper auto stop signal circuit
Component Function Check 1. CHECK FRONT WIPER (AUTO STOP) OPERATION CONSULT DATA MONITOR Select "WIP AUTO STOP" of IPDM E/R DATA MONITOR item. Operate the front wiper. With the front wiper operation, check the monitor status. Diagnosis Procedure 1. CHECK IPDM E/R OUTPUT VOLTAGE ...

FEB system operation
1. Vehicle ahead detection indicator 2. FEB warning indicator 3. FEB system warning light The FEB system will function when your vehicle is driven at speeds above approximately 3 mph (5 km/h). If a risk of a forward collision is detected, the FEB system will provide an initial warning t ...

B260f engine status
Description BCM receives the engine status signal from ECM via CAN communication. DTC Logic DTC DETECTION LOGIC NOTE: If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to SEC-29, "DTC Logic". If DTC B260F is displayed with D ...