Nissan Maxima Service and Repair Manual: Engine lubrication system

Service Data And Specifications (SDS)

General Specification GENERAL SPECIFICATIONS Drive Belt DRIVE BELT Spark Plug SPARK PLUG *: Always check with the Parts Department for the latest parts information. Intake Manifold INT ...

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along with a fro ...

Other materials:

B257B, B257C ambient sensor
Description COMPONENT DESCRIPTION Ambient Sensor The ambient sensor (1) is installed to the front bumper reinforcement. It detects ambient temperature and converts it into a resistance value which is then input into the A/C auto amp. Ambient Sensor Circuit AMBIENT TEMPERATUR ...

P0138, P0158 HO2S2
Description The heated oxygen sensor 2, after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Even if switching characteristics of the air fuel ratio (A/F) sensor 1 are shifted, the air-fuel ratio is controlled to stoichiometric, by the signal ...

ECM branch line circuit
Diagnosis Procedure 1.CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side). - Models without automatic drive position ...