Nissan Maxima Service and Repair Manual: Engine control system

Service data and specifications (SDS)

SERVICE DATA AND SPECIFICATIONS (SDS) Capacity Thermostat Radiator ...

Basic inspection

...

Other materials:

P0840 transmission fluid pressure SEN/SW A
The secondary pressure sensor detects secondary pressure of CVT and sends a signal to the TCM. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE NOTE: Immediately after performing any "DTC CONFIRMATION PROCEDURE", always turn ignition switch OFF. Then wait at least 10 seconds b ...

TPMS
System Diagram System Description DESCRIPTION During driving, the tire pressure monitoring system receives the signal transmitted from the transmitter installed in each wheel, and turns on the low tire pressure warning lamp when the tire pressure becomes low. The control unit (BCM) for t ...

Sunroof switch
Description Transmits switch operation signal to sunroof motor assembly. Diagnosis Procedure 1.CHECK SUNROOF SWITCH INPUT SIGNAL Turn ignition switch ON. Check voltage between sunroof motor assembly harness connector and ground. 2.CHECK SUNROOF SWITCH CIRCUIT Turn ...